Featuring.

Patented “Pinnacle® Conveyor” design with increased stockpile capacity.

True 30m (100ft) Long.

30kW motor with soft start.

Up to *700tph capacity.

Will stack sand, soil, gravel, crushed rock, ore, coal, coke, woodchips, limestone etc.

This large radial stacker has the potential to stack up to *12.2m high with up to *30,000 cu.m stockpile volume at 270 deg radial arc. (*depending on material type / conveying angle / angle of repose etc).

5.5kW Hydraulic Powerpack to raise / lower and drive radial wheels.

Heavy Duty CEMA C – 5″ diam trough rollers and returns.

4 Ply – 900mm wide HD belt (Vulcanised).

Hydraulic folding for quick set-up.

Hydraulic Lift Rams for quick change from towing to radial mode with XTP Axle.

5th wheel pin (bolt in 2″ OR 3 1/2″ options).

Lights and brakes. (Potential to be road towable – unit is NOT road licenced).

Industry leading 2 year component warranty and 5 year structural warranty.

Available for immediate pick-up.

Priced at AUD$238,000.00+GST = $258,500.00 Ex works 888cse Perth depot.

Hire or hire-buy options may be available – subject to terms and conditions.

Please contact us or call 08 9550 6388 or 0447 888028 or 0447 888388 for more information / spec sheets / brochures etc.

Note some photos are file photos for example only.

Actual Conveyor is the one painted GREY.

The post Large Radial Stacker appeared first on 888 Crushing & Screening Equipment.

The range of TeleStacker® Conveyors is second to none in the industry. 888CSE is the leading supplier of Telescoping / Telescopic conveyors to the mining industry in Australia. 888CSE carries in stock all major parts for the Superior Industries Telestacker® and Powerstacker® Conveyors to ensure continual uptime on remote sites.

Options for manual or fully automated, PLC controlled, continually moving and telescoping stockpiling are available to avoid material segregation. Stockpiles over 250,000 tonnes (or larger stockpiles using multiple units) can be created safely without segregation using the telescopic stinger section. Other benefits include avoiding compaction of the finished product. Telestack

Huge operational savings are offered compared to traditional load/haul stacking operations. TeleStacker® Conveyor units are ideal for larger quarry and mining applications, including Iron Ore fines and lump stockpiling, Gold and Copper Ore heap leach applications, Salt, Roadbase, Rail Ballast, Grain, Woodchips, Nickel ore, Bauxite and any other type of crushed ores etc. Telestack

Coupled with a RazerTail or Razerlink Truck Unloader Conveyor System – also from Superior Industries, the Telestacker conveyor offers the ability to stockpile a huge amount of material without re-handling in many applications. All conveyors from Superior Industries offer the best available warranty and support in the industry, with a 2 year conveyor warranty and 5 year structural warranty. Telestack

The TeleStacker® Conveyor is the strongest built and safest telescopic conveyor available. Many options are available to suit the client’s exact specifications including patented FD (Fold Down) axles – on wheels or tracks – for quick set-up when moving the units between sites.

Please call Melissa Zadra on 0447 888028 or our head office on 08 9550 6388 or contact us today for more information.

For videos of the TeleStacker® Conveyor click here. Photos show the Telescopic / Telescoping Facility of the TeleStacker® Conveyors.

The post Telestacker Conveyor. Superior Industries Telescoping Conveyors appeared first on 888 Crushing & Screening Equipment.

With the option of a standard Radial Conveyor and the added benefit of Track Dolly for full 360 rotation and travel on site the McCloskey Track Radial Conveyor is the ideal track radial stockpiler.

Manufactured from heavy duty lattice section this unit is the heaviest duty available for this type of configuration.

An added bonus is that the track dolly can be used on several different McCloskey conveyor units can easily be removed to position other equipment as required.

Available as an 80ft (24m), 100ft (30m) or incredible 125ft (38m) Conveyor with Cat engine option for superior product support in remote areas this conveyor system is unbeatable for contractors, quarries or mining operations. 24m Units supplied in WA.

A 42 x 125 (38m) V-Bin Stacker has also been developed and deployed in Qatar with track mobility and bogie wheels that allow for quick and easy movement with minimal effort.

The integral and removable 360 degree track bogie delivers maximum mobility to virtually any industry – from mining to ship-loading. This versatile conveyor is road towable for quick deployment between locations.

The ‘V-Bin’ section itself is fully hydraulically folding and the direct feed hopper boasts a standard capacity of 7.5 cubic yards, and a stockpile capacity of 7797 cubic yards. The McCloskey 42 x 125 V-Bin Stacker has a counterweighted design to keep the axle out of the stockpile, and is capable of a stockpile height of 48’6” (14.78m) at a peak rate of up to 800TPH.

Powered by 140hp (104kw) Cat 4.4 engine, the 42 x 125 V-Bin Track Bogie Stockpiling Conveyor is rugged, versatile and working across industries around the world.

The track dolly also allows self loading / unloading with transport on – off floats instead of using cranes onto drop decks or otherwise - thus reducing transport costs between sites.

The Powered Radial Option gives unrivalled stockpiling capabilities when compared to traditional straight line tracked conveyors.

Please call 08 9550 6388 or contact us for more information at any time.

The post Track Radial Conveyor appeared first on 888 Crushing & Screening Equipment.

The TS4065 Stacker is an ideal choice for the professional operator.

Offering an unbelievable payback period compared to running a loader and operator, the Tracked Stacker from McCloskey is the only choice for all serious mobile crushing and screening operations.

Suitable for primary stockpiling or finished aggregate / sand stockpiling with high (up to 600tph) handling capacity from built in engine and hydraulic controls. The tracked stacker can be set-up to work within minutes of arriving on site.

The TS4065 Tracked Stacker from McCloskey can also be plugged into the hydraulics on a suitable screening plant eliminating the use of the engine on the stacker except for tracking.

This feature reduces fuel usage and engine maintenance even further, offering unbelievable savings when compared to double handling with a loader.

The Tracked Stacker from McCloskey is heavier duty and fitted with higher quality components when compared to “low cost” stackers from other suppliers.

Heavy Duty 24m models are also available in both standard, heavy duty and direct feed configurations.

Please call 08 9550 6388, 0447 888388 or 0447 888028 or contact us for more information.

(GeoTrek – 80ft x 42″ Track Mounted Heavy Duty Stacker)

The post Tracked Stacker appeared first on 888 Crushing & Screening Equipment.

The Superior Industries Patented RazerTail® Truck Unloader allows your operation to dramatically cut truck unloading cycle times.

Trucks can be through the gate, unloaded and back down the road in less than five minutes, maintaining the quality of the material. (As little as 90 seconds to actually unload the truck).

Our patented Dual Lane RazerTail truck unloader reduces cycle times even more by allowing two trucks to drive over and tip at once. If the tipping is coordinated, a continuous feed can be achieved. As one truck is setting up, the other one is unloading material. This dual lane system is essential in many ship-loading and barge loading operations to reduce loading times to the minimum.

Compared to multiple handling common to dozers and loaders, this portable conveying system handles material just once, preserving its quality as it moves from truck to pile.

In the past, conventional truck unloading systems often chewed up a full day’s work for setup. With the RazerTail® Truck Unloader that task has been drastically reduced.

When you arrive at the site and position the unit accordingly, simply fold out the Optional Built in ON BOARD steel ramps, OR build the required earthen ramps and you are ready to begin production.

• Speed belly and end dump truck cycle times to 60-90 seconds per load.
• Move material directly from truck to pile and park any material degrading truck traffic.
• Patented self-cleaning ramps reduce maintenance by dumping extra material into the hopper.
• Easy setup with onboard truck ramps.
• Fold up and move around the site for quick unloading.

With optional extra wings the Superior Industries RazerTail® Truck Unloader can also be fed with a conventional wheel loader / front end loader and used as low height feed bin.

Optional, on board hydraulic folding eliminate eliminate the use of earthen or separate ramps.

For Videos of the RazerTail® Truck Unloader in action – please click here.

Please call Melissa Zadra 0447 888028 (East Coast) or Paul O’Neill on 0447 888388 (West Coast) or our head office on 08 9550 6388 or Contact us for more information.

The post RazerTail® Truck Unloader appeared first on 888 Crushing & Screening Equipment.

The McCloskey MTD50R is a diesel hydraulic powered truck unloader suitable for rear tip feed or front end loader (FEL) / Wheel Loader operations.

Suitable for feeding all types of minerals and ores from stockpiles onto Overland conveyors, barges or as a transfer conveyor onto our telescopic Telestacker Conveyors for loading larger vessels / ships, the McCloskey MTD50R offers unrivalled portability and ease of operation and maintenance.

Fitted with a Powerful cat C4.4 130HP engine, the McCloskey MTD50R conveyor can be tracked around the site / port facility with ease and can be set up for operation in just a few minutes.

Capacities of over 1000tph can be achieved in certain applications. (subject to material type / method of feed etc).

The remote control radial boom (with luffing capability) allows the McCloskey MTD50R to be used a direct vessel / barge loader, eliminating the use of a separate truck unloader and discharge conveyor.

The MTD50R also offers an ideal solution for stockpile reclamation during shutdown or unplanned maintenance of traditional stacker reclaimers at port, mine and stockyard facilites.

For more information please contact us or call 08 9550 6388 or 0447 888028 at any time.

The post McCloskey MTD50R appeared first on 888 Crushing & Screening Equipment.

The McCloskey TF80 Reduces Stockpiling Costs and Compaction and Safety Issues caused by driving up stockpiles with loaders.
The TF80 Mobile Tracked Feeder Stacker enhances the process of stockpiling materials that traditionally can cause blockages in conventional stackers.

The TF80 facilitates the handling and stockpiling of iron ore and other ores, crushed materials, ballast, sand, large wood waste, bark, compost and topsoil, all of which can be fed into the heavy duty, fully lined hopper with large loaders and excavators.
In addition to the mobility enhanced by tracks, a large feeder hopper, wide heavy duty belts, (24m) long conveyor, and a heavy duty feeder make the TF80 the most robust mobile stockpiling conveyor for use across a number of industries.

Weighing in at around 34 tonnes all up, the McCloskey TF80 is up to 80% heavier duty and 50% higher capacity than most off the shelf “equivalent” design of feeder stackers from other suppliers.

This impressive Machine can operate at over 1000tph in certain conditions, depending on feed material type and conveying angle etc.

At the maximum conveying angle the TF80 offers the highest stockpile available in this class of machine.

The McCloskey TF80 Feeder stacker can also be used as a transfer / re-feed conveyor to feed onto an overland conveyor.

The TF80 from McCloskey can also be used to feed surplus material into a crushing / screening plants during maintenance periods to ensure continuous uptime.

Additional uses include transfer of material into a feed bin, or for loading screening plants, trucks, rail wagons, barges etc.

Screening / Stacking Options – Fit the optional Vibrating Grid (Single or Double deck) to make this unit a Screener Stacker!

Belts uprated to 4 ply for Heavy Duty Stockpiling Operations and larger feeder materials.

Feeder installed with heavy duty impact rollers for handling larger materials up to 300mm.

Full “Mine Spec” Compliant Versions available with Magnets, Metal Detection, Maintenance Platforms etc.

Please call 08 9550 6388, 0447 888028 OR 0447 888388 or contact us for further information.

Click Here :> Low Hours / USED Machine available! (Subject to prior commitment)

Wheel Mounted Feeder-Stackers are also available.

Available in 85′ (26m) or 100′ (30m) models, the McCloskey Feeder Stacker combines a high capacity 48″ wide belt feed hopper with a 48″ wide heavy duty truss stacking conveyor. This machine allows stockpiling of bulky material with a tendency to bridge, such as: compost, wood waste, bark and logs.

The Feeder Stacker is also available as an aggregate spec unit. The agg-spec Feeder Stacker comes with a hydraulic tipping grid, smooth 42″ belts with blade style belt scrapers and a higher TPH capacity.

The post McCloskey TF80 – Feeder Stacker appeared first on 888 Crushing & Screening Equipment.

Meeting AS4324.1 Structural Standards, each radial and luffing Powerstacker conveyor supplied from 888CSE is engineered and supplied by Superior industries with a patented FD axle assembly.

This patented innovation makes for a swift transition between road-ready and stockpiling modes all with the simple pull of a hydraulic lever.

Other patented advancements include the Powerstacker Powerfold. This long-lasting system is designed to provide extra protection to the hydraulic cylinders during operation.

The PowerStacker® Conveyors are backed by the strongest warranty program in the industry. Each Superior Conveyor unit is offered with a 2 year component warranty and a 5 year structural warranty.

Electrics and guards for Powerstacker conveyors supplied through 888CSE are also designed / built to Australian Standards.

Several Powerstacker conveyors have been used in WA Mine sites already by contractors wanting a large but very portable stacker conveyor. A typical 36″ x 150ft (46m x 900mm) Powerstacker can handle up to 800tph of ore and can easily stack / stockpile around 50,000 tonnes of iron ore in a 90 degree radial arc.

Larger capacity units may also be available in certain applications.

Client feedback has stated that “the Powerstacker paid for itself in less than *6 months operation!” *when compared to the running / operating costs of large front end loader(s) and operators to stockpile the ore, which were used previous to the installation of the Powerstacker conveyor(s).

Each unit is manufactured with Superior brand conveying components, plus an endless list of options that we’ll help you to evaluate for your application.

The Powerstacker conveyor is one of the most user friendly, highly portable, quickest set up and high capacity mobile radial conveyors available today.

Please call 0473 888141 (All East Coast Enquiries) or Melissa Zadra 0447 888028 (West Coast) or our head office on 08 9550 6388 or Contact us for more information.

or visit the Superior Industries Website for more information.

46m long Powerstacker Conveyors are currently available for long or short term hire within Australia. (subject to terms & prior commitment).

The post Powerstacker Conveyors. Superior Conveyors appeared first on 888 Crushing & Screening Equipment.

When you add up the costs of maintenance, fuel and ever-evolving environmental impacts, haul trucks can be an expensive method of moving material.

Superior Industries overland conveyors offer their users some economic relief. Over time, the savings are calculated in everything from labour costs to energy.

Superior Industries overland conveyors are designed to handle a diverse group of industries. Capacities ranging from a trickle of material all the way up to several thousand tonnes per hour, our application engineers will grade your site and desired material quantity to develop a perfect fit.

Each custom engineered overland conveyor comes with assembled head and tail sections, plus all the guarding, drives and other components. Intermediate sections are available in various lengths.

Examples of Superior Industries overland conveyor systems can be found in various applications around the world.

A recent custom designed heavy duty conveying application installed in the US handles over 3000tph of crushed rock on a downhill conveying system. Click here to see video.

The latest innovation from Superior Industries is the Zipline® Range of Overland Conveyors.

Designed to handle large volumes (up to 1500tph) over medium distances, the Zipline® is quickly assembled using a pre-engineered, modular overland system designed for quick, tool-less installation.

Compared to a spec-by-spec highly engineered system, this unit is a lower cost overland alternative. The Zipline® Overland Conveyor is designed with off-the-shelf components for easy sourcing of replacement idlers, pulleys, and accessories.

The modular design allows for easy structural additions in the future.

Typically costing sometimes less than half the price of a custom designed conveying solution, the Zipline® system can be used in many “medium duty” applications.

Sand and gravel pits, aggregates, quarrying and in-pit crushing / conveying applications as well as medium sized mining applications are just some of the uses of the Zipline® conveying system.

Relocation of the Zipline® can also be achieved in a relatively short space of time when compared to traditional installations. Click here to see installation video.

The Zipline can therefore be an alternative to “Grasshopper” or “Jump” conveyors for certain applications, or used as an extended transfer conveyor to increase stockpiling applications.

Please call Melissa Zadra 0447 888028 for all Superior Industries Overland Conveyors Australia-wide, or phone our head office on 08 9550 6388 or Contact us for more information.

or visit the Superior Industries Website for further information.

Testimonial – Dakota Aggregates.

The post Overland Conveyors appeared first on 888 Crushing & Screening Equipment.

The all New RazerLink ™ from Superior Industries is suitable for truck unloading, material transfer, stockpiling and vessel loading. All with a single machine.

Offering the same drive over capability as it’s older cousin the “RazerTail”, PLUS a rear tip or FEL (Wheel Loader) feed option, this unique Razerlink ™ machine can perform various functions due to the additional luffing and telescopic boom capabilities.

Click here to see video of the machine set up and operation.

Click here to see video of the machine used with ship loading.

Suitable for handling a range of materials such as Iron Ore lump / fines, Various Crushed Minerals, Coal, Coke, Grain, Sand, Woodchips, Bauxite etc, the Razerlink is the ultimate in flexible feeding, loading and truck unloader operations.

Please contact us now or call 08 9550 6388 or 0447 888028 at any time.

The post Razerlink ™ appeared first on 888 Crushing & Screening Equipment.